Return to Site

Video: Installing a Lakewood Trailing Arm 2010 Chevy Camaro Video

Installing a Lakewood Trailing Arm 2010 Chevy Camaro Video - Pep Boys Video Gallery
Close Top

Installing a Lakewood Trailing Arm 2010 Chevy Camaro Video

Length: 1:36 Added: Nov-12 Views: 4

Video on how to install a Lakewood trailing arm on a 2010 Chevrolet Camaro. Step 1 is to remove the inboard and outboard fastener on the trailing arm. Sometimes there is a little tension on the trailing arm so you may have to back it all the way out. Step 2 is to raise the rear end of the car in order to access the lower bolt. Step 3 is to lower vehicle and reinstall the Lakewood trailing arm in reverse order with the grease fitting down. Complete step 4 by raising the vehicle again to install on opposite side. Tighten bolts, then lower and tighten again. Go to www.pepboys.com to view additional do-it-yourself videos.

50%
EN ES FR

Video on how to install a Lakewood trailing arm on a 2010 Chevrolet Camaro. Step 1 is to remove the inboard and outboard fastener on the trailing arm. Sometimes there is a little tension on the trailing arm so you may have to back it all the way out. Step 2 is to raise the rear end of the car in order to access the lower bolt. Step 3 is to lower vehicle and reinstall the Lakewood trailing arm in reverse order with the grease fitting down. Complete step 4 by raising the vehicle again to install on opposite side. Tighten bolts, then lower and tighten again. Go to www.pepboys.com to view additional do-it-yourself videos.